How to Choose the Right Hydro Evacuation Nozzle
There are several types of hydro evacuation nozzles for different types of applications and project conditions. It can be challenging to find the right hydro evacuation nozzle. Therefore, find out which nozzle suits your needs before you embark on renting a hydro excavation nozzle is important. Before choosing which hydro evacuation nozzle to rent, there are several things you need to consider. Before you embark on renting a hydro evacuation nozzle, you should first conduct proper research. Finding the best place for hydro evacuation nozzle rentals in your area and identifying your needs should be your priority when researching.
Finding a hydro evacuation nozzle that matches the capabilities of your pump is important. However, to do this, you need to understand how hydro evacuation nozzles are sized. The flow rate of the water used depends on the nozzle size and pressure of the water. Overloading the hydro evacuation nozzle can be disastrous. Check the manufacturer’s ratings of the pump and the flow rate chart if you want to avoid overloading a hydro evacuation nozzle. Secondly, you should consider the project you are working on when choosing a hydro evacuation nozzle. Rotating turbo nozzle is the best hydro evacuation nozzle for potholing applications. The best nozzle for potholing applications is the rotating turbo nozzle because it has a high impact zero degrees stream that rotates at an optimized speed to form a corn shaped pattern.
The best hydro evacuation nozzle for trenching applications is the static zero degrees nozzle. When cutting through dirt using a static zero-degree nozzle, you will use less water. Static zero degree nozzle form a blade-like flow by combining two or more static streams in a linear pattern. The most suitable nozzle for trenching applications is a static zero-degree nozzle because it has a linear flow. If the safety of underground utilities is a concern, you should find a small-sized hydro evacuation nozzle. The less flow of a small-sized hydro evacuation nozzle cannot damage underground utilities. You should also lower the pressure of the flow when using underground evacuation nozzles in places with underground utilities.
The recommended maximum pressure when using a rotating nozzle in places with underground utilities is twenty-five hundred psi. To wash the underground utility and avoid damage the utilities, you should lower the pressure to twenty-five hundred psi. When choosing an underground evacuation nozzle, you should also consider the digging speed and the water consumed during the digging. If you are far away from a water source or dumping site for the debris, you should choose a small-sized nozzle. Choosing a small-sized nozzle will help you conserve water even though it will take time to dig the required size.